Machining centre mod. Zenith

Machining centre mod. ZENITH
Download the brochure
Headstock sectionmm420x500
Boring spindle diametermm130-150

The Innse-Berardi machining centres model Zenith extend the basic concepts typical of the machining centres and of the automatized production cell, to a field of dimensions and power which is higher than those to this point usual.

As a matter of fact these machining centres allow a high level of automation for machining medium size workpieces by means of the use of different attachment heads, pallet systems and a high number of tools.

They are completely hydrostatic, equipped with horizontal spindle, movable column and roto-traversing table.

Thanks to the kinematic chains with backlash recovery system, it is possible to assure the maximum stiffness and machining accuracy.

Boring spindle diametermm130-150
Headstock sectionmm420x450
Horizontal stroke of column (W axis )mm2.000-4.000
Stroke of boring spindle (Z-axis )mm700-900-1.000
Max. spindle power (S1)kW44-60
Nominal torque (S1)Nm2.200-2.800
nr. of speed rangenr.2
Max. spindle speedrpm3.000
Vertical stroke of head (Y axis )mm2.500÷3.000
Table longitudinal stroke ( (X axis )mm 4.000

The above specifications are not binding and the Builder reserves the right to

modify them at any time when deemed necessary